Snow Performance Stg 2.5 Boost Cooler F/I Prog. Water / Meth Injection Kit
Snow Performance Stg 2.5 Boost Cooler F/I Prog. Water / Meth Injection Kit
The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives a accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability. Especially helpful for direct injected engines to remove 100% of carbon build up on the valves. Recommended for all street/strip driven forced induction vehicles using a turbo or centrifugal supercharger (Procharger/Vortech) looking for cooling over a wide range.
The VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors!
This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump "sleeve". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. Whether running a supercharger, turbo, or high compression motor the Stage 2.5 Boost Cooler™ will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time!
Features:
- U.S.A. Made
- Adjustable Progressive Water Methanol Engagement & Monitoring
- Digital Boost Reading (1-50 PSI)
- Recommended For Street Driven Turbo and Centrifugal Supercharger Applications
- Supports 1,000+ HP
- 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
- Snow Performance Hyper-Sonic™ Water Methanol Nozzle
- Snow Performance ACU-SEAL™ Water Methanol Compression Fittings
- Snow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump
- Snow Performance Running "S" Engraved Low Profile Nozzle Holder
- Snow Performance Running "S" Engraved Low Profile High Flow Check Valve
Let customers speak for us
from 218 reviewsExcellent quality , Brian was great help , very knowledgeable and professional will definitely buy again.
Brian”s great! Fast shipping great communication.
smooth ride even bottomed out, Brain does great on his customer service
Fit perfect
THIS IS AN AWESOME COMPANY TO DO BUSINESS WITH, THEY ARE VERY PROMPT TO TAKE CARE OF YOUR ORDER AND THEIR PRODUCTS ARE THE VERY BEST. AWESOME JOB!!!
I've tried 3 different diff mounts. The Lux Mount by SacCity, AMT Double Barrel, and just for the **** of it the Duralast c5 mount. Finally bought this 954 Bullet from FI Performance. In a nutshell the 954 had the least NVH of them all and best of all zero wheel hop even with crappy tires. Thanks Mr. Brian for your vast knowledge on this subject.
I purchased this kit and the install was fairly straightforward, the quality of the kit is amazing!!! Made a very noticeable difference in tightening up the entire suspension, and I did not notice an increase in NVH.
I can't say enough about silvers and brian. I recently got into an accident that broke one of my coilovers. Brian immediately reached out to his people and got me a single coilover. You can't go wrong with silvers or brian.
I am well pleased in choosing brian and crew for my coilovers. They have been very helpful and got me my order right away.
worked perfect. Install was a breeze! everything was great! Except for the waiting period due to transitioning. maybe next order will be super quick. Thanks Brian for keeping in touch.👍🏼
These are by far a major upgrade over stock the oem rubber mounts couldn't take the abuse and shredded leaking luid all over the engine bay and leaving my engine flopping the amt mounts are a mix of metal on the outside and inside and a hard rubber "bushing" in the middle giving you the best of both worlds and making it durable and everything tighter very easy to install and torque down looks better and definitely feels better very minimal increase in noise and vibration but not enough to really notice or effect everyday driving a must have for higher horsepower applications or if you just beat the **** out of it.
This is a high quality 3D printed guage mount that is installed and replaces the driver's left side heat vent to mount your gauge to and it will still blow air through it without any issues as it's vented on the top and bottom it installs very easy and fast and will fit multiple different gauges and is very sturdy and strong if you have a AEM guage this is not the correct mount they make a specific mount for the AEM gauges.
This bracket is for the c6 corvettes with the Z51 package only not the Z06 they have different coolers and therefore different brackets with that being said this bracket works fantastic definitely when using it with the A&A supercharger kit and don't want to delete your oil cooler like me and so this allows you to move your cooler to a different location and out of the way and still be able to use it with the supercharger.
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!
I upgraded to the four piston Wilwood calipers on the front and rear of my C5 Z06 and boy what a huge difference!!! Not only did they change the way that the car brakes, they look so much better than stock. Couldn't ask for better customer service than Brian!!! One word of advice though....make sure that your offset will clear these calipers!!!